More examples in Engineering/Engineering Diagrams

Engineering Welding Chart Diagram Example

SmartDraw includes Engineering Diagram examples like this Engineering Welding Chart Diagram template that you can easily edit and customize in minutes.





Text in this example:

REFERENCES AND SIDES
Attach the reference to the line for top side. If reference agrees with the arrow, it signifies Arrow Side. If not, it signifies Other Side.
Flip the symbol and attach it to the line to signify the opposite side.
Attaching a reference to both sides signifies both sides. Can be staggered to indicate order of completion.
CONTOUR SYMBOLS
Flat Contour
Convex Contour
Concave Contour
Arrow Side
Other Side
L - P
S (E)
(BOTH SIDES)
(ARROW
SIDE)
(OTHER
(N)
Number of Spot, Seam, Stud,
Plug, Slot, or Projection Welds
Specification,
Process, or Other
Reference
Tail (May Be Omitted
When Reference is
Not Used)
Depth of Bevel; Size or
Strength of Certain Welds
Groove Weld Size
Contour Symbol
Finishing Symbol
Groove Angle; Included Angle
of Countersink for Plug Welds
Root Opening; Depth of Filling
for Plug and Slot Welds
Length of Weld Segment
Pitch (Center-to-Center Spacing)
of Weld Segments
Field weld symbol
Weld-all-around symbol
Reference Line
Arrow connecting reference line to arrow side member of joint or arrow side of joint
Basic weld symbol or derail reference
Elements in this area remain as shown when tail and arrow are reversed
Weld symbols shall be contained within the length of the reference line
LOCATION OF ELEMENTS OF A WELDING SYMBOL

Share this page: